Saturday, October 10, 2009

10 October 2009

Its been a couple of weeks again, I decided to laminate the benchtop with Tasmanian Oak, It's taken a bit of time give the glue needs to cure for 24hrs and the benchtop has to be done in 4 stages, the first was the right side of the top followed by the left side (shown below), The other 2 stages are the front trim ( shown further below) then the side trims.

Gluing of the bench.

The benchtop without the trims.

The benchtop with the front trim being glued on.

This was this weekends effort, I managed to cut and assemble two wall mount cupboards.