Gluing of the bench.
The benchtop without the trims.
The benchtop with the front trim being glued on.
This was this weekends effort, I managed to cut and assemble two wall mount cupboards.
Saturday, October 10, 2009
10 October 2009
Its been a couple of weeks again, I decided to laminate the benchtop with Tasmanian Oak, It's taken a bit of time give the glue needs to cure for 24hrs and the benchtop has to be done in 4 stages, the first was the right side of the top followed by the left side (shown below), The other 2 stages are the front trim ( shown further below) then the side trims.
Gluing of the bench.
The benchtop without the trims.
The benchtop with the front trim being glued on.
This was this weekends effort, I managed to cut and assemble two wall mount cupboards.
Gluing of the bench.
The benchtop without the trims.
The benchtop with the front trim being glued on.
This was this weekends effort, I managed to cut and assemble two wall mount cupboards.
Subscribe to:
Post Comments (Atom)
You're doing alright, buddy!!! It's looking good.
ReplyDelete